The American style air hose is retractable into the main body . Please check the area circled in yellow in the picture below.
If it is not stored here, please contact us here .

It is possible that the French attachment is not properly attached.
Please check the following.

The Smart Air Pump's Presta-style attachment is a screw-in type .
When attaching the Presta valve to the attachment, please turn it clockwise until it stops. We also have a video on how to inflate a Presta valve. Click here for the video . If the air still leaks, please contact us using the form below.

Please check the following two points.

(1) The Smart Pump's Presta-style attachment is a screw-in type .
When attaching the Presta attachment to a Presta valve, be sure to turn it clockwise until it stops .

[2] Tips for removing the French attachment: 1) Hold the French attachment with one hand, and use the other hand to turn the American air hose counterclockwise to remove it.
2) Remove the Presta attachment from the valve by rotating it counterclockwise.

The main unit, American air hose, and air hose attachment port may become hot, but please rest assured that this product is equipped with a safety device that will automatically turn off the power before overheating.
However, immediately after continuous operation , the American-style air hose and the air hose attachment port will be hot, so please do not touch and remove them immediately. Please wait a little while before removing them.

Due to the structure of the British valve to prevent air leakage, the air pressure will not be displayed just by connecting it.
With a smart pump, when the air coming out of the air hose enters the tire tube, a pushing force is created by the air pressure inside the tire tube.
The system works by measuring the air pressure inside the tire that is being pushed back.
Therefore, measurements can only be taken while air is being injected .

To find out what air pressure is best for you, click here .