How to use RIDE PRO

Guide Menu

Please select the purpose from the icon.

How to operate the touch panel

Touch panel operation

  1. To turn on the power, press and hold the power icon for 3 seconds until "ON" appears on the screen. (To turn off the power, press and hold the power icon for 3 seconds until "OFF" appears.)
  2. You can "switch modes" with the M button.
  3. Press and hold the M button for 3 seconds to change the air pressure unit.
  4. You can adjust the air pressure by pressing the +/- button. *Press and hold to quickly change the value.
  5. How to read the screen Upper number: Displays the current tire pressure Lower number: Displays the desired tire pressure
  6. Press the power button to start or stop inflation. *It makes a 65dB noise.
  7. Press the LED light button to turn on the LED light. Press it again to switch to flashing light. Press it again to turn off the LED light.

Automobile

○ The air inlet (American valve) has the shape shown in the photo below.

What to prepare

Air hose (stored in the main unit) and RIDE main unit

bike-car-ridepro.jpg__PID:8122185c-4afe-4cbb-964e-6e0a6ecee7d0

[1] Press and hold the power button to turn on the power.

IMG_0420.PNG__PID:86205bca-ae8e-48c9-990a-b44c22ae7616

(2) Connect the air hose to the main unit.

IMG_0421.PNG__PID:5bcaae8e-08c9-490a-b44c-22ae7616a4f3

[3] Remove the valve cap from your car. Be careful not to lose it!

IMG_0422.PNG__PID:caae8e08-c999-4ab4-8c22-ae7616a4f3ac

(4) Attach the air hose to the Schrader valve by turning it clockwise. Since the air hose is for a Schrader valve, no attachment is required.

IMG_0424.PNG__PID:ae8e08c9-990a-444c-a2ae-7616a4f3ac02

[5] Press the "M button" to set the mode to "Car." Use the +/- buttons to adjust the desired tire pressure. (Default setting: 35 PSI, average guideline pressure: 37 PSI)

IMG_0425.PNG__PID:8e08c999-0ab4-4c22-ae76-16a4f3ac02af

[6] Check the tire pressure setting.

IMG_0426.PNG__PID:08c9990a-b44c-42ae-b616-a4f3ac02af35

[7] You can change the units by pressing and holding the M button for 3 seconds.

IMG_0427.PNG__PID:c9990ab4-4c22-4e76-96a4-f3ac02af3541

[8] Use the +/- buttons to adjust the desired air pressure.

IMG_0430.PNG__PID:0ab44c22-ae76-46a4-b3ac-02af3541d32e

[9] Press the "Start button" to start inflating!

IMG_0431.PNG__PID:b44c22ae-7616-44f3-ac02-af3541d32e4f

[10] It will automatically stop when inflation is complete.

IMG_0432.PNG__PID:4c22ae76-16a4-43ac-82af-3541d32e4f88

[11] Remove the air hose from the main unit.

IMG_0433.PNG__PID:22ae7616-a4f3-4c02-af35-41d32e4f888b

(12) Don't forget to tighten the air valve cap.

Motorcycles (Motorcycles)

○ The air inlet (American valve) has the shape shown in the photo below.

What to prepare

Air hose (stored in the main unit) and RIDE main unit

bike-car-ridepro.jpg__PID:8122185c-4afe-4cbb-964e-6e0a6ecee7d0
IMG_0434.PNG__PID:c20f0a50-b007-42b4-b4dd-450cb51ec3fd

(1) Press and hold the power button for 3 seconds to turn on the power.

IMG_0435.PNG__PID:0f0a50b0-0732-44b4-9d45-0cb51ec3fd92

(2) Connect the air hose to the main unit.

IMG_0436.PNG__PID:0a50b007-32b4-44dd-850c-b51ec3fd9216

[3] Remove the valve cap from your motorcycle. Be careful not to lose it!

IMG_0437.PNG__PID:50b00732-b4b4-4d45-8cb5-1ec3fd921657

(4) Screw the air hose into the Schrader valve clockwise. *Since the air hose is for Schrader valves, no attachments are required.

IMG_0439.PNG__PID:b00732b4-b4dd-450c-b51e-c3fd921657b6

[5] Press the "M button" to set the mode to Bike.

IMG_0440.PNG__PID:0732b4b4-dd45-4cb5-9ec3-fd921657b623

[6] Check the tire pressure setting. *If you are aiming for the perfect tire pressure, please refer to this page.

IMG_0441.PNG__PID:32b4b4dd-450c-451e-83fd-921657b623c1

[7] Press and hold the "M button" for 3 seconds to change the unit.

IMG_0442.PNG__PID:b4b4dd45-0cb5-4ec3-bd92-1657b623c14c

[8] Use the +/- buttons to adjust the desired air pressure.

IMG_0443.PNG__PID:b4dd450c-b51e-43fd-9216-57b623c14c68

[9] Press the "Start button" to start inflating!

IMG_0444.PNG__PID:dd450cb5-1ec3-4d92-9657-b623c14c68de

[10] It will automatically stop when inflation is complete.

IMG_0445.PNG__PID:450cb51e-c3fd-4216-97b6-23c14c68dea1

(11) Remove the air hose from the tire.

IMG_0446.PNG__PID:0cb51ec3-fd92-4657-b623-c14c68dea1d5

(12) Don't forget to tighten the air valve cap.

Bicycle/Mamachari

○ The air inlet (British valve) has the shape shown in the photo below.

What to prepare

British valve attachment, air hose (stored in the main unit), RIDE main unit

eishiki-ridepro.jpg__PID:22185c4a-fe9c-4b96-8e6e-0a6ecee7d088
IMG_0447.PNG__PID:75e53b9b-d9e9-4c72-aceb-4d1e673d2dd3

(1) Press and hold the power button for 3 seconds to turn on the power.

IMG_0448.PNG__PID:e53b9bd9-e96c-42ec-ab4d-1e673d2dd3cd

(2) Connect the air hose to the main unit.

IMG_0449.PNG__PID:3b9bd9e9-6c72-4ceb-8d1e-673d2dd3cd5a

(3) Attach the British attachment to the air hose by turning it clockwise.

IMG_0450.PNG__PID:9bd9e96c-72ec-4b4d-9e67-3d2dd3cd5aaf

[4] Remove the valve cap from your bicycle. Be careful not to lose it!

IMG_0451.PNG__PID:d9e96c72-eceb-4d1e-a73d-2dd3cd5aaf7f

[5] Attach the British valve attachment to the valve.

IMG_0452.PNG__PID:e96c72ec-eb4d-4e67-bd2d-d3cd5aaf7f42

[6] Press the "M button" to set the mode to bicycle.

IMG_0453.PNG__PID:6c72eceb-4d1e-473d-add3-cd5aaf7f42b6

[7] Check the tire pressure setting. *If you want to set the perfect tire pressure, please refer to this page.

IMG_0454.PNG__PID:72eceb4d-1e67-4d2d-93cd-5aaf7f42b67a

[8] Press and hold the "M button" for 3 seconds to change the unit.

IMG_0455.PNG__PID:eceb4d1e-673d-4dd3-8d5a-af7f42b67a17

[9] Use the +/- buttons to adjust the desired air pressure.

IMG_0456.PNG__PID:eb4d1e67-3d2d-43cd-9aaf-7f42b67a17da

[10] Press the "Start button" to begin inflating.

IMG_0457.PNG__PID:4d1e673d-2dd3-4d5a-af7f-42b67a17daa2

[11] It will automatically stop when the air is fully inflated!

IMG_0458.PNG__PID:1e673d2d-d3cd-4aaf-bf42-b67a17daa203

(12) Don't forget to tighten the air valve cap.

Cross Bike/Road Bike

○ The air inlet (British valve) has the shape shown in the photo below.

What to prepare

British valve attachment, air hose (stored in the main unit), RIDE main unit

sports-ridepro.jpg__PID:185c4afe-9cbb-464e-ae0a-6ecee7d08828
IMG_0459.PNG__PID:c81bfe2f-ee24-4c84-81a3-d39e7891b911

(1) Press and hold the power button for 3 seconds to turn on the power.

IMG_0460.PNG__PID:1bfe2fee-248c-4481-a3d3-9e7891b911ce

(2) Connect the air hose to the main unit.

IMG_0461.PNG__PID:fe2fee24-8c84-41a3-939e-7891b911ce71

[3] Remove the valve cap. Be careful not to lose it!

IMG_0462.PNG__PID:2fee248c-8481-43d3-9e78-91b911ce7196

(4) Loosen the screw on the top of the valve counterclockwise until it stops.

IMG_0463.PNG__PID:ee248c84-81a3-439e-b891-b911ce719660

(5) Push the valve once to release the air. This will help remove any stuck valve.

IMG_0465.PNG__PID:8c8481a3-d39e-4891-b911-ce719660dd5d

(6) Install the Presta attachment by screwing it in clockwise until it stops.

IMG_0466.PNG__PID:8481a3d3-9e78-41b9-91ce-719660dd5d57

(7) Attach the air hose to the Presta attachment. Screw it in clockwise.

IMG_0467.PNG__PID:81a3d39e-7891-4911-8e71-9660dd5d57fd

[8] Press the "M button" to set the mode to Bicycle. Use the +/- buttons to adjust the desired air pressure. (Default setting: 38 PSI, average guideline pressure: 100 PSI)

IMG_0468.PNG__PID:a3d39e78-91b9-41ce-b196-60dd5d57fdf8

[9] Check the tire pressure setting. *If you want to set the perfect tire pressure, please refer to this page.

IMG_0469.PNG__PID:d39e7891-b911-4e71-9660-dd5d57fdf868

[10] You can change the units by pressing and holding the "M button" for 3 seconds.

IMG_0470.PNG__PID:9e7891b9-11ce-4196-a0dd-5d57fdf86857

[11] Use the +/- buttons to adjust the desired air pressure.

IMG_0471.PNG__PID:7891b911-ce71-4660-9d5d-57fdf8685756

[12] Press the "Start button" to begin inflating.

IMG_0472.PNG__PID:91b911ce-7196-40dd-9d57-fdf86857567b

[13] It will automatically stop when inflation is complete.

IMG_0473.PNG__PID:b911ce71-9660-4d5d-97fd-f86857567bf1

(14) Remove the Presta attachment from the air hose.

IMG_0474.PNG__PID:11ce7196-60dd-4d57-bdf8-6857567bf199

[15] Don't forget to tighten the air valve cap.

Ball

○ The air inlet (American valve) has the shape shown in the photo below.

What to prepare

Ball attachment, air hose (stored in the main unit), RIDE main unit

ball-ridepro.jpg__PID:5e812218-5c4a-4e9c-bb96-4e6e0a6ecee7
IMG_0475.PNG__PID:2c9481f3-f7ad-4bb4-9247-aef45e812218

(1) Press and hold the power button for 3 seconds to turn on the power.

IMG_0476.PNG__PID:9481f3f7-ad5b-44d2-87ae-f45e8122185c

(2) Connect the air hose to the main unit.

IMG_0477.PNG__PID:81f3f7ad-5bb4-4247-aef4-5e8122185c4a

(3) Attach the ball attachment to the air hose by turning it clockwise.

IMG_0478.PNG__PID:f3f7ad5b-b4d2-47ae-b45e-8122185c4afe

[4] Press the "M button" to set the mode to Ball.

IMG_0479.PNG__PID:f7ad5bb4-d247-4ef4-9e81-22185c4afe9c

[5] Check the air pressure on the ball.

IMG_0480.PNG__PID:ad5bb4d2-47ae-445e-8122-185c4afe9cbb

[6] Use the +/- buttons to adjust the desired air pressure (average recommended pressure: 8 PSI).

IMG_0481.PNG__PID:5bb4d247-aef4-4e81-a218-5c4afe9cbb96

[7] Use the +/- buttons to adjust the desired air pressure (average recommended pressure: 8 PSI).

IMG_0482.PNG__PID:b4d247ae-f45e-4122-985c-4afe9cbb964e

[8] Press the "Start button" to start inflating!

IMG_0483.PNG__PID:d247aef4-5e81-4218-9c4a-fe9cbb964e6e

[9] Press the "Start button" to start inflating!

IMG_0484.PNG__PID:47aef45e-8122-485c-8afe-9cbb964e6e0a

[10] It will automatically stop when inflation is complete.

IMG_0485.PNG__PID:aef45e81-2218-4c4a-be9c-bb964e6e0a6e

(11) Remove the ball attachment from the air hose.